perhaps you could emphasize the existence of the blade internally (experientially) in section throughout the building and heighten the awareness of the blade 'moving' through the space at all levels of this 'distorted void'. You may plan to open up between the levels at the back of the blade area too -it is not clear in the sketches...and again a degree of distortion could be included so that the sense of clear span opening is there but not always the same on all levels? Your elevator could then be as shown, in the void with your stair and 'bridging' between the larger and smaller plate areas, used both to periodically support the shaft and/or to access it based on the primary route of programmed access on each level. Use the possibility of the elevator doors opening at the side or back to meet the programmed elements or circulation spaces?
perhaps you could emphasize the existence of the blade internally (experientially) in section throughout the building and heighten the awareness of the blade 'moving' through the space at all levels of this 'distorted void'. You may plan to open up between the levels at the back of the blade area too -it is not clear in the sketches...and again a degree of distortion could be included so that the sense of clear span opening is there but not always the same on all levels? Your elevator could then be as shown, in the void with your stair and 'bridging' between the larger and smaller plate areas, used both to periodically support the shaft and/or to access it based on the primary route of programmed access on each level. Use the possibility of the elevator doors opening at the side or back to meet the programmed elements or circulation spaces?
ReplyDelete